Filter

OTTICA IP PTZ Camera Controller, Supports IP VISCA, Serial Port VISCA, Pelco-D/P

$549.99

Model: OTT-CONTROLLER-V2

Supports IP VISCA, Serial Port VISCA, PELCO‐D/P Protocols Simultaneously
RJ45, RS422, RS232, RS485 Control Interfaces
Control up to 10 Cameras
3 Knobs Control Camera Parameters Displayed on Designated LED Screens
Streamlined Camera Preset Configuration

In stock

Downloads

Manual: User Manual PDF

Firmware Updates: Right click here and click "save link as" to download

SKU: OTT-CONTROLLER-V2 Categories: Cameras, PTZ Camera Accessories, PTZ Controllers Tags: camera controller, eng, ip controller, ndi, ndi hx, network controller, onvif controller, ottica, pelco controller, ptz, ptz camera, ptz controller, sports, studio, studio controller, visca, visca controller

OTT-CONTROLLER-V2

The Ikan OTT-CONTROLLER-V2 is a compact PTZ controller that allows you to control up to 10 cameras using either IP or analog control protocols. The large LED screen displays menu settings and network information, whereas the smaller LED screens allows you to control various exposure and color parameters.

Controller Interface

The OTT-CONTROLLER-V2 has ports for RJ45, RS232 (DB9), RS422 & RS485 (Terminal Connector), 12v Barrel Connector, and USB micro (for firmware upgrade).

PRECISE CONTROLS

This compact camera controller features a high‐quality 2-axis joystick for smooth control of pan & tilt, and a zoom rocker. Two separate knobs allow for control of Focus & PTZ/Focus Speed. The speed knob provides 7 levels of adjustment. Pressing and holding the Fn button will move the camera back into the default position.

Quick Camera Parameter Adjustment

By pressing either AE Mode or WB Mode buttons, the three smaller LED screens will display different settings combinations that correlate to the mode you select. Each screen has a designated knob for adjusting the value of the parameter displayed on the LED screen. These parameters include focus, gain, iris, gain limit, brightness, exposure compensation, shutter, red gain, blue gain, and color temperature.

SIMULTANEOUS PROTOCOL CONTROL

The OTT-CONTROLLER-V2 gives you flexibility when operating different cameras with different control protocols. Other controllers might only allow you to control using one protocol at any given time, whereas this controller enables you to mix & match different control protocols simultaneously. Compatible protocols include: IP VISCA, VISCA, PELCO D/P.

Preset Positions

To create a camera preset, simply press and hold one of the preset buttons for 2 seconds. When you want to call that preset, tap the same button and your camera will move to the desired preset position.

What's Included:
1 x PTZ Controller
1 x Phoenix Contact 4 pin 3.81mm Terminal
1 x Power Adapter
1 x User Manual

OTTICA Controller V2

Controllable Cameras	5
Communication Protocol	VISCA, PELCO P/D, UDP
Number of LED Displays	4 Color LED Display Screens
Number of Camera Channels	5
Variable Knobs	4
Joystick	2-Axis
Zoom Mode	Tele-Wide Bridge Keys
Buttons	17 Silicon Buttons
Presets Short Keys	5 Presets or Max 10 Presets for selection per Each Channel
Focus Modes	Auto/ Manual/ OPT
Pan/Tilt Rotation Speed	7-Level Adjustment
Zoom In/Out Speed	7-Level Adjustment
Baud Rate	2400bps, 4800bps, 9600bps, 19200bps, 38400bps
Data Bits	8 Bit
Stop Bit	1 Bit
Parity Bit	None
Internet Protocol	UDP / IP VISCA
Rated Voltage	DC 12V
Rated Current	0.3A max
Max Power Consumption	3.6W
Password Privacy Protection	Yes
Security Lock	Kingston’s Security Lock
Operating Temperature	0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature	-20°C ~ +60°C / -4°F ~ 140°F
Working Environment	Indoors
Dimensions (L x W x H)	9.6" x 6.4 x 1.8" / 244 x 164 x 48mm"
G.W	2.4 lbs. / 1.1 kg
RS422/RS485 Interface	Phoenix Contact 4 pin 3.81mm Terminal
RS232C Interface	DB9 Male Interface
LAN Interface	RJ45 Female Interface
Power Supply	12V 100-240VAC 50-60Hz
Firmware Upgrade	Via Micro USB

Manual: User Manual PDF
Firmware Updates: Right click here and click "save link as" to download