Filter

Geared Aluminum Pedestal w/ Fluid Head, 22 lbs Max Payload, Fixed Counterbalance w/ Variable Tilt & Pan Drag (E-Image)

$999.99

Model: EI-GA780-KIT

Full System Supports Payloads up to 22 lbs.
Fixed Counterbalance Supports up to 13.2 lbs.
Variable Pan & Tilt Drag
Extra-Tall Tripod Legs with Geared Rising Center Column
Height Range of 43.9″ – 106.9″
EI-7003C Dolly w/ Locking Wheels and Cable Guard
Includes Two GB2 Extendable Pan Handles
Includes Carry Bag for Full Kit

In stock

Downloads

Data Sheet: EI-GA780-KIT Downloadable PDF

SKU: EI-GA780-KIT Categories: Camera Support, ENG / Sports, House of Worship, Pedestal, Studio / Broadcast

EI-GA780-KIT

Transport your camera around the set or studio smoothly and quickly with this Height-Adjustable Pedestal System from E-Image. This pedestal is made up of the heavy-duty 780FH fluid head, the GA230 tripod pedestal, the EI-7003C tripod dolly, two padded panhandles, and carrying bags for the fluid head & pedestal legs, and an additional one for the dolly. The maximum payload for this full pedestal system is 22 lbs.

FLUID HEAD

The 780FH head features a 75mm bowl, variable pan & tilt drag, and fixed counterbalance. The head comes with a top-loading quick-release mounting plate with a 5.7″ slide range that helps to balance large studio cameras or teleprompters. It features two rosettes where you can connect the two included padded panhandles. The fluid head also features individual locks for both pan & tilt.

PEDESTAL SYSTEM

The geared center column of the tripod can extend 18″ and lock in place for high-angle shots. WIth the tripod mounted onto the dolly, this pedestal system has a height range of 43.9″ to 106.9″. The EI-7003C dolly features three locking rubber wheels, a load capacity of 88.2 lb, and a 39.4″ footprint diameter. It can be removed from the legs and folded for transport and storage and even has a handle for easy carrying.

HEAVY-DUTY DOLLY

The E-Image Pedestal Dolly supports up to 88.2 lbs and is ideal for moving tripods along a flat surface for quick repositioning between shots. The adjustable foot mounts provide a quick and easy setup. This dolly is perfect for both studio and on-location use where support for heavy setups is a requirement.

What's Included:
1 x 780FH Fluid Head
2 x GB2 Panhandles
1 x GA230 Aluminum Tripod
1 x EI-7003C Dolly
1 x SC-3 Carrying Bag for Tripod & Head
1 x DB-01 Carrying Bag for Dolly

General Specs

Max Payload	22 lbs
Counterbalance Payload	13.2 lbs
Min Height	43.9"
Max Height	106.9"

Fluid Head

Max Payload	22 lbs
Bowl Size	Flat Base
Counterbalance Payload	13.2 lbs
Counterbalance System	Fixed
Pan Drag	Variable
Tilt Drag	Variable
Tilt Range	-75° / +90°
Net Weight	4.0 lbs./1.8 kg
Net Weight w/ Dual Handles	5.2 lbs./2.35 kg
Mounting Plate	Manfrotto 501, Top-mounted or side mounted
Mounting Points	1x 1/4"-20 Thread
Bubble Level	Yes
Camera Plate Length	4.7 in./ 120mm
Tilt Lock	Thumb Lock
Weight of Head	1.5 lbs
Weight of Head w/ 1 Panhandle	1.8 lbs
Weight of Head w/ 2 Panhandles	2.1 lbs

Tripod Legs

Material	Anodized aluminum alloy
Head Attachment Fitting	Flat Base
Leg Stages/Sections	Two-Stage / Three-Section
Leg Lock Type	Rotary clamp
Spreader	Mid-Level
Spiked/Retractable Feet	Yes/Yes
Load Capacity	26.5 lbs. / 12 kg
Height Range	33.1 in ~ 90.6 in. / 84 cm ~ 230 cm
Folded Length	28.3 in. / 72 cm.
Weight	8 lbs. / 3.6 kg.
Elevator Height	16.9 in./43 cm

Dolly

Net Weight	8.6 lbs./3.9 kg
Footprint Diameter	39.4 in./100 cm
Height	5.7 in./14.5 cm
Radius	19.7 in./50 cm
Wheel Width	2.95 in./75 mm
Lockable Wheels	Yes
Build Material	Legs: Aluminum \| Wheels: Rubber \| Screws: Steel
Payload	88.2 lbs./40 kg.