The Ikan Blitz 1000 Pro is the latest addition to the Blitz family of wireless transmitters. With the BZ1000-PRO, we increased the range to 1000 feet and designed the body of the transmitter and receiver to be compatible with Ikan’s Quick Mount system. The Blitz features uncompressed, zero delay wireless video in a lightweight and affordable package. With a 1000 foot range, this system is perfect for various types of uses such as with wireless follow focus systems as well as gimbal and Steadicam operators. The Blitz 1000 Pro is perfect anytime you need to be untethered from the camera and require reliable wireless video over long distances.
Zero Delay and 1000 Feet of Range
The Blitz supports zero delay video transmission so it is perfect for situations where timing is critical such as with wireless follow focus systems. It features a 1000 foot range to give you the freedom to move about without having to worry about losing signal.
Many wireless systems compress video, but this negatively affects the video quality and introduces delay. The Blitz 1000 Pro sends uncompressed video and allows for zero delay because the system doesn’t spend time compressing and uncompressing the video. The Blitz supports up to 1080 60p uncompressed video.
Inputs and Outputs
Whether you are using HDMI or SDI, the Blitz has you covered. It supports both HDMI 1.3 and 3G-SDI so you get uncompressed high definition video up to 1080 60p. The Blitz systems are also capable of cross converting whatever signal you are feeding them, allowing you to switch from SDI to HDMI or HDMI to SDI.
Broadcast to 4 RX’s
Send your signal simultaneously into 4 receivers.
Best Bang for your Buck
Spend less and get more range per dollar.
$4.19 / ft.
$5.99 / ft.
(Based on Ikan’s 1000 ft. range v. competitor’s 1000ft. range)
To keep the system light and the cost of use low, we include the necessary battery plates with the Blitz. They come pre-installed and allow you to power the units easily and reliably. The transmitter uses the Sony L Series style batteries and the receiver relies on a V-Mount battery. The units also include 4-pin LEMO compatible power connectors so you can supply power externally with the included P-Tap cables. This allows you to use the same pro batteries that are powering your camera to power the Blitz as well.
and Easy to Use
The Blitz 1000 Pro is made out of durable machined aluminum and is extremely easy to set up. You don’t have to mess with complicated menus or setups with its simple-to-use wireless channel selection switch. Just power on the units and they will sync in about 20 seconds or less. The transmitter is small and lightweight so it can be mounted just about anywhere like to your camera’s shoe mount. The receiver features five external antennas to ensure a strong signal as well as 4 signal strength LED indicators. This way you always have a clear indication of your signal strength.
360° Product View
The Complete Package
The Blitz 1000 Pro ships inside of a durable hard case to make transporting it easy. Inside, you will find an articulating arm and clamp to help you mount the units. Two P-Tap to Lemo compatible cables are also included for more power options. With the Blitz 1000, you’ll get the complete package.