BZ2000-PRO: Blitz 2000ft Wireless Uncompressed 3G-SDI/HDMI Video Transmitter & Receiver Kit

Blitz 2000ft Wireless Uncompressed 3G-SDI/HDMI Video Transmitter & Receiver Kit

$3799.00
Limited Stock
Model: BZ2000-PRO
Features
  • Uncompressed w/ Zero Delay Wireless Video
  • Designed with Ikan's Quick Mount System
  • 3G-SDI and HDMI Inputs and Outputs
  • Up to 3,297 ft. Line of Sight Range
  • Best Performance within 2,000 ft. Range
  • Uncompressed 10-Bit, 4:2:2 Video
  • HDMI to SDI Cross Conversion
  • Transmitter Supports Sony L Series Batteries
  • Receiver Supports V-Mount Batteries
  • Supports up to 4 Receivers connected to 1 Transmitter

BZ2000-PRO

BZ2000-PRO

The Ikan Blitz 2000 Pro is the latest addition to the Blitz family of wireless transmitters. With the BZ2000 Pro, we added a high gain panel antenna to increase the range to 2000 feet. The units are designed to be compatible with Ikan's Quick Mount system. The Blitz features uncompressed, zero delay wireless video in a lightweight affordable package. With a 2000 foot range, this system is perfect for those professionals that are in need of ultra-long range wireless video.

Zero Delay and 2000 Feet of Range

The Blitz supports zero delay video transmission, which means that it can be used in situations where timing is critical. It features a 2000 foot range to give you the freedom to move about without having to worry about losing signal.

Zero Delay and 2000 Feet of Range

Uncompressed Video

The Blitz 2000 Pro sends uncompressed video and has zero delay because the system doesn't waste time compressing and uncompressing the video. The Blitz supports up to 1080 60p uncompressed video.

Blitz technology

Blitz technology

INFERIOR TECHNOLOGY

INFERIOR TECHNOLOGY

Integrated Design

The receiver of the BZ2000 is designed to be easily mounted to the back of the panel antenna. Also, the mounting bracket has a 3/8-16 threaded receiver that allows you to mount the antenna to a compatible light stand.

Integrated Design

Inputs and Outputs

Whether you are using HDMI or SDI, the Blitz has you covered. It supports both HDMI 1.3 and 3G-SDI so you get uncompressed high definition video up to 1080 60p. The Blitz systems are also capable of cross converting whatever signal you are feeding them. For example, you can go from SDI to HDMI or HDMI to SDI.

Inputs and Outputs
Battery Power

Battery Power

To keep the system light and the cost of use low, we include the necessary battery plates with the Blitz. They come pre-installed and allow you to power the units easily and reliably. The transmitter uses the Sony L Series style batteries and the receiver relies on a V-Mount battery. The units also include 4-pin LEMO compatible power connectors so you can supply power externally with the included P-Tap cables. This allows you to use the same pro batteries that are powering your camera to power the Blitz as well.

Battery Power

Durable, Reliable,
and Easy to Use

The Blitz 2000 Pro is made out of durable machined aluminum and is extremely easy to set up. You don't have to mess with complicated menus or setups with its simple-to-use wireless channel selection switch. Just power on the units and they will sync in about 20 seconds or less. The transmitter is small and lightweight so it can be mounted just about anywhere like to your camera's shoemount. The receiver can be used with or without the panel antenna. This allows you to get more compact when you don't need the full wireless range. The receiver features five external antennas to ensure a strong signal as well as 4 signal strength LED indicators.

360° Product View

The Complete Package

The Complete Package

The Blitz 2000 Pro ships inside of a durable hard case to make transporting easy. The case holds the panel antenna and the complete wireless system with accessories. This includes an articulating arm, clamp, and shoemount to help you mount the system. Two P-Tap to LEMO compatible cables are also included to give you more power options. With the Blitz system, you always get the complete package.

The Complete Package

Transmitter Receiver
Interface

3G-SDI Input (BNC Female)
HDMI Input (Type A Female)
2 x Antenna Ports (RF-2 SMA Male)
DC Input (4 pin LEMO compatible Female)

3G-SDI Input (BNC Female)
HDMI Output (Type A Female)
DC Input (4 pin LEMO compatible Female)

 

Input Voltage 7 - 16.8V DC
7 - 16.8V DC
Power Consumption <6.5W
<7.5W
Dimensions 115 x 67 x 23 mm
182 x 127 x 24 mm
Weight 254g
662g
Input Video Format

HDMI: 525i, 625i, 720p 50/59.94/60,
1080i 50/59.94, 1080p 23.98/24/25/29.97/30/50/59.94/60

SDI: 3G, HD, and SD-SDI (Auto Selected)

SMPTE-259/274/292/296/372/424/425

Output Video Format

HDMI: 525i, 625i, 720p 50/59.94/60,
1080i 50/59.94, 1080p 23.98/24/25/29.97/30/50/59.94/60

SDI: 3G, HD, and SD-SDI (Auto Selected)

SMPTE-259/274/292/296/372/424/425
Input Audio Format SDI Embedded 4 Channel 24-bit / 48KHz
Audio Output SDI Embedded 4 Channel 24-bit / 48KHz
Signal Indicators Power: Green / Video: Yellow
Power: Green / Wireless Signal 5 x Green
Video: Yellow
Frequency Bands 5.1 - 5.9 GHz
5.1 - 5.9 GHz
Modulation Mode OFDM 16QAM
OFDM 16QAM
Transmission Power Max 21 dBm
Receiver Sensitivity -75 dBm
Band 40MHz
40MHz
Operating Temeperature 0°C ~ 40°C (Operating)
-20°C ~ 60°C (Storage)
0°C ~ 40°C (Operating)
-20°C ~ 60°C (Storage)
Compliance FCC, CE
FCC, CE

 

Antenna

   
Frequency Range

5.0 - 5.9 GHz

 

Gain 14 ± 0.5 dBi

(F/B Ratio)
>25 dB

Isolation > 26 dB

Horizontal Beam Width 40 ± 5°
Vertical Beam Width

40 ± 5°

V.S.W.R. <2.0
Polarization 5 ports: 3 ports vertical, 2 ports ± 45°
Maximum Power
100W
Impedance 50 ohm

Operating Temperature
-40°F ~131°F (-40°C ~ +55°C)
Connector Type
5 x N-K

Lightning Protection
DC Ground
Antenna Dimensions
12 x 12 x 0.9 in. (305 x 305 x 25mm)
Material ABS

Weight 4.3 lbs (1.97 kg)

Rated Wind Velocity
36.9 m/s

WHAT'S INCLUDED:

1 X Articulating Arm
1 X Clamp
1 X Hard Case
1 X Mounting Screws
1 X Panel Antenna
1 X Receiver
1 X Receiver Mounting Bracket
1 X Shoemount Adapter For Transmitter
1 X Sony L Series Battery Plate (Installed On TX)
1 X Stand Mount Brace
1 X Transmitter
1 X V-Mount Battery Plate (Installed On RX)
2 X P-Tap To Lemo Cables
6 X NJWC To SMA Coaxial Cable Connectors
7 X 5GHz Antennas (SMA Female)
SPECIFICATIONS:

Shipping Dimensions:21.3 x 9 x 18 in.
Shipping Dimensions (Metric):54.2 x 23 45.8 cm
Shipping Weight:22 lbs
Shipping Weight (Metric):9.9 kg
UPC Code:847983023288

Essential Accessories
$19.95
Model: BZ400-ANT
Features
  • Replacement antenna for BZ400
Model: BZ400-ARM
Features
  • Replacement articulating arm for Blitz Wireless video system
$24.95
Limited Stock
Model: BZ400-CLAMP
Features
  • Replacement mounting clamp for Blitz wireless video system
$69.95
Model: BZ400-LEMO
Features
  • Spare P-TAP to Lemo Compatible Cable for Blitz Wireless Video Systems
$379.99
Included Option
In Stock
Model: IB-L95
Features
  • Compact Form Factor
  • Compatible with Gold Mount & Sony V-mounts
  • LED Display Indicates Battery Capacity and Real-Time Run Time
  • 2-Pin Power Tap for 12 V Accessories
$79.95
Model: IBS-970
Features
  • Compatible with Sony Camcorders that use L-Series Batteries
Model: ICH-DUAL-S
Features
  • Charges two batteries simultaneously
DV Chargers

ICH-750
Sony Compatible Battery Charger
$24.95
Battery Options

IBS-750
IBS-750 Sony L-Series NP-F750 Compatible Battery
$44.95
Pro Batteries

IB-LD295S
V-Mount 6.6Ah/95Wh, 14.8V, Li-Ion Battery w/ LCD display & Battery Status
$249.99
Pro Battery Chargers

C-2KS
V-Mount Compatible Charger
$329.99

C-1K
C-1K Battery Charger (BP-U, V-Mount & Anton Bauer)
$69.95

C-1K-KIT-95S
95Wh V-Mount Pro Power Kit
$299.99

C-2KIT-95S
Dual Pro Battery Charger with 2x 95Wh V-Mount Batteries
$739.99
Wireless Transmitters

BZ-AC
AC Adapter for Blitz Wireless Video Systems
$89.95