MS-PRO-DGH-KIT: MS-PRO Dual Grip Handle Gimbal Kit

MS-PRO Dual Grip Handle Gimbal Kit
for Mirrorless Cameras

$699.99
MSRP: $749.99 (6% off)
SPECIAL Discount
Model: MS-PRO-DGH-KIT
Features
  • Durable All Aluminum Construction
  • Allows Dual Hand Control of your MS-PRO
  • 360 Degree Movement from Yaw Axis
  • Works with Mirrorless Cameras up to 1.9lbs (900 grams)
  • Equipped with 3 Axis Gyro Stabilized Brushless Motors to Balance Most Mirrorless Cameras as well as Phones and GoPro Cameras
  • OLED Display Screen to show operating modes
  • Equipped with 32-Bit Controller & 12-Bit Encoder
  • Lithium Battery Powered- Low Maintenance, Eco-Friendly
  • Illuminated ON-OFF Switch/Battery Indicator 3/8"-16 Tripod Mount Socket

EC1

MS-PRO-DGH-KIT

The Beholder MS-PRO is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of small cameras weighing up to 1.9 lbs. The Beholder MS-PRO is lightweight, easy to use, and can be carried in your camera bag. In addition, the MS-PRO is versatile enough to be used with a GoPro or Smartphone.

360 Motor

The MS-PRO features a 360 degree rotating brushless motor on the yaw axis for less restricted movement.

360 Motors

Designed for Mirrorless Cameras

With a payload of up to 1.9 lbs., the MS-PRO has the ability to stabilize a wide range of today’s popular mirrorless cameras such as the Sony a6300, Sony a7SII, Panasonic GH5 and even cameras as small as a GoPro or smartphone. *Smartphone adapter not included.

MS-PRO with Sony a6500

360° Product View

MS-PRO with Smartphone

360° Product View

Advanced Stabilization

Using a 32-bit controller with a 12-bit encoder, the MS-PRO uses an adaptive PID algorithm to produce a reliably efficient

handheld stabilizer. This means that the gimbal will respond faster, balance easier, and have a greater battery life.

Advanced Stabilization

Lock Mode

In Lock Mode, the Yaw, Pitch, and Roll axis work together to keep the camera pointed in one direction. The camera's composition will stay the same no matter how you move the handle.

Lock Mode
Point & Lock

Point & Lock

Quickly lock your camera into any position by manually pointing and holding it in any direction. After a few seconds, the camera will lock and hold its position until it is reset back to default.

Auto Inversion

Auto Inversion

Switch to Inverted Mode at any time by simply flipping the handle over the camera. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes.

Auto Inversion

Multiple Follow Modes

The MS-PRO features 3 different follow modes. In Yaw-Axis Follow Mode, the MS-PRO will only follow your pan movements. In Pitch and Yaw-Axis Follow mode, the MS-PRO will follow your pan and tilt movements. Finally, the 3-Axis Follow Mode gives you full control allowing you to pan, tilt, and roll.

Lock Mode

(Profile 1)

Lock Mode

Lock Mode will allow the camera to hold a certain direction, and will not follow, pan, or tilt.

Lock Mode

Pan-Follow Mode

(Profile 2)

Pan-Follow Mode

Pan-Follow Mode allows the gimbal to follow pan axis, and hold the tilt position.

Pan-Follow Mode

Follow Mode

(Profile 3)

Follow Mode

Follow Mode allows the camera to follow both tilt and pan directions.

Follow Mode

3-Axis Follow Mode

(Profile 4)

3-Axis Follow Mode

3-Axis Follow Mode has no restrictions as it allows the camera to follow pan, tilt, and roll.

3-Axis Follow Mode
OLED Status Display

OLED Status Display

A display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode.

Easy to Use

With a newly designed quick-release baseplate system, the MS-PRO is easy to balance without the need of any tools.

Easy to Use

Multiple Mounting Options

The MS-PRO handle comes with two 1/4-20 mounts that are perfect for mounting accessories such as a light, microphone, or monitor. A 3/8-16 thread located on the bottom allows you to securely mount the MS-PRO to a tripod, jib, or dual handle support system such as the Ikan DGH.

Multiple Mounting Options Multiple Mounting Options

Beholder MS-PRO Gimbal Balancing Tutorial

Watch Julio Ramon from Ikan Corp balance the MS-PRO 3-axis handheld gimbal stabilizer for Mirrorless cameras.

  • 360
    Motors
  • Axis of
    Movement
  • Modes of
    Operation
  • Maximum
    Payload
  • Minimum
    Payload
  • DSLR
    Compatible
  • Mirorless Camera
    Compatible
  • Smartphone
    Compatible*
  • EC1
  • Yes
  • 3
  • 4
  • 4.5 lbs / 2041 g
  • 2.0 lbs
  • Yes
  • Yes
  • No
  • MS-PRO
  • Yes
  • 3
  • 4
  • 1.9 lbs / 900 g
  • 0 lbs
  • No
  • Yes
  • Yes
  • MD2
  • Yes
  • 3
  • 4
  • 6.6 lbs / 2994 g
  • .44 lbs
  • Yes
  • Yes
  • No

* Smartphone Adapter
Not Included

camera chart


What's Included

MS-PRO
1x Battery Cap With 3/8-16 Mount (Pre-Assembled)
1x Battery Holder
1x MS-PRO Gimbal Stabilizier
1x Instruction Manual
1x Micro USB AC Adapter
1x Quick Release Plate (Pre-Assembled)
3x 18650 Batteries
1x 1/4"-20 Camera Screw (Pre-Assembled)
DGH
1x 1/4"-20 D-Ring Screw (Pre-Assembled)
1x Gimbal Crossbar
2x Gimbal Crossbar Feet
2x Rubber Grip Handles
1 x 3/8"-16 to 1/4"-20 Adapter (Pre-Assembled)
4 x 1/4"-20 Flat 5/32 Socket Cap Screws
1x 5/32 Hex Key
SPECIFICATIONS:

Shipping Dimensions:16 x 10 x 6 in.
Shipping Dimensions (Metric):406 x 254 x 152 mm
Shipping Weight:8 lbs
Shipping Weight (Metric):3.6 kg
UPC Code:847983021352
Weight :2.94 lbs (Combined)
Weight (Metric):1.33 kg (Combined)

Essential Accessories
$31.95
Model: IB-18650-26-3PK
Features
  • Universal rechargeable Li-ion battery
  • Perfect for your gimbals, LED Lights, and other high-drain electronic devices.
  • Integrated battery overcharge & discharge protection circuit.
  • No Memory Effect
$59.95
Model: ICH-SC4
Features
  • Charges 18650 and 18350 Gimbal Batteries
  • Will Also Charge AA, AAA, C, SC, and Other Rechargeable Batteries (Consult Quick Start Guide for Full List)
  • Controlled by microcomputer
  • Charges two different styles of batteries simultaneously
$39.95
Model: MS-E002
Features
  • Compatible with models:
    • DS1
    • MS1
    • MS-PRO
    • EC1
    • DS2
    • DS2-A
$39.95
Model: P-CLAMP
Features
  • Allows you to Mount any Smart Phone to the EC1 & MS-PRO
  • High Quality Machined Aluminum
  • Multiple 1/4-20 Mounts for Versatile Mounting Options
  • Includes Rubber Pads to Protect your Phone from Scratches
3.7V Power

SC4-18650-26-2
ICH-SC4 Battery Charger with 2x 18650 2600mAh Batteries
$64.95

SC4-18650-26-3
ICH-SC4 Battery Charger with 3x 18650 2600mAh Batteries
$74.95

SC4-18650-26-4
ICH-SC4 Battery Charger with 4x 18650 2600mAh Batteries
$84.95
Tripods & Monopods

MC-90
Carbon Fiber Monopod (E-Image)
$219.99

NAB 2017
by A.J. Mash

"See their gimbals, lights, field monitors, support systems and much more. Great products from one of my favorite companies."

Click to view full article
EC1 & MS-PRO at NAB
by School Video News

"These are great for stabilizing your shots. They usually come in a handheld unit, but you can attach it to an accessory handle to distribute the weight better. They have 4 different modes and 360 degree pan motors."

Click to view full article
Best Mirrorless Camera Gimbal
by Think Media

"All of the components are very impressive, good construction, & the handle is also robust. Very impressed with the results. Out of all the gimbals I've tested, it's one of the easiest gimbals to navigate through the modes, so that's a huge advantage."

Click to view full article